The new generation of Genie XC boom lifts are designed to exceed customers' expectations.
Genie Xtra Capacity (XC) boom lifts are designed to work in more applications that require higher capacities. Easy to spot on rental yards and jobsites, the new generation of Genie booms has an 'XC' designation in their nomenclature.
'XC' means Xtra Capacity
'Industry-wide, there is a mix of high- and dual-capacity machines,' says Adam Hailey, Genie Director of Product Management, Terex AWP. 'This can be challenging, particularly when spec'ing a project that requires lifting heavy loads. Responding to customer demand worldwide for higher capacity aerial work platforms, the new generation of Genie XC boom lifts are designed to exceed customers' lift capacity expectations.'
All Genie XC booms combine the benefits of a dual-envelope design to provide an unrestricted range of motion with a platform capacity of 660 lb (300 kg) and a restricted operating envelope capacity of 1,000 lb (454 kg). To support additional weight on the platform, Genie XC booms are engineered with an updated boom structure that boasts increased performance, range of motion and envelope control, as well as a robust jib capable of easily handling the standard 1,000-lb (454 kg) maximum capacity.
The XC nomenclature also lets rental customers know that this new boom complies with the overload restriction guidelines in the proposed ANSI A92 and CSA B354 industry standards in North America, as well as the current European EN280 and Australian AS 1418.10 standards.
New technology enhances safe work practices
To increase performance, decrease set-up time and improve the overall productivity, all Genie XC models boast the ability to do zero-load field calibration. These new Genie booms are equipped with a load sense cell that continuously checks the weight in the platform and adjusts the envelope to match the load chart. A tilt sensor also gives users access to different ranges of motion based on the machine's rated slope limit, on certain machines even on extreme angles, maximising the ability to access even the most hard-to-reach work areas.
An updated CAN-based control system on most of the new Genie XC models brings the familiar SmartLinkÖ control system features to these new booms. Operators will find the control layouts on these new Genie XC machines to be consistent and intuitive, making operation of the booms easy and straightforward. 'And, service technicians will appreciate the onboard diagnostics available on the new LCD display at the ground controls,' says Hailey, 'allowing machine setup, calibration and troubleshooting right on the machine - no need for a laptop or any additional accessories.'