ZF presents the continuous variable hydrostatic 2 HC 85 and ZF axle systems for compact loaders.Apart from the amount of load, the requirements on the vehicle are however similar. In addition to the known requirements for more compact drive systems with reduced noise level there is an ever increasing demand for a reduction of fuel consumption. At the same time, however, vehicle speed should be increased. The new hydrostatic drives of the HC-range meet these requirements of the market.Features• Hydrostatic transmission for construction machinery up to 10 tonnes• Equipped with 2 crankshaft radial piston motors, therefore efficiency is increased and consequently fuel consumption is reducedAdvantages• Vehicle speeds up to 42 km/h (26 mph)• Increased riding comfort, continously variable without gear shifts• No interruption of traction, therefore improved handling performance• Low start speed due to electronically controlled driveline management• Better performance as there is no interruption of tractive effort• An electronic propulsion control ensures a low starting speed, the output control (limit load control) also adjusts the diesel engine to the optimum speed when driving at full throttle• Thanks to the use of crankshaft radial piston motors efficiency is increased and consequently fuel consumption is reduced.• Noise reduction through the low speed of the hydro motors• Reduction of interfaces to the vehicle due to the integration of the hydro motors into the transmission system• Increased degree of freedom regarding vehicle installation thanks to a very compact design.• One source supply of complete driveline components: Transmisions, axles and driveline control.Integrated crankshaft – radial piston motorsCompared with other hydrostatic driveline solutions with bent axis axial piston motors ZF installs crankshaft radial piston motors. With the crankshaft radial piston motor design there are less leakages thanks to piston seals. Pistons are guided in pivoted cylinders and as a result of this there are no lateral forces.Essential features of this crankshaft radial piston motor are:• Wide range of displacement variation• Displacement variation integrated into the crankshaft up to 0 ccm/rev• Speeds up to 2,500 rpm with high pressure• High starting torque• High efficiency• Low noiseZF axle systemsZF rigid axles MT-L 3010/15/20/25 feature a particularly slim design. The high ratio in the wheel heads’ final drive allows a compact axle drive thus providing increased ground clearance. The system comprises a directly mounted transfer box for hydrostatic drive suitable for 55 to 160 ccm engines. Service brake and parking brake are offered as a drumbreak plus the series also offers a low-wear multi-disc brake at the axle input.The MT-L 3045/55 axles being provided by ZF are optimally suited for the on-site operation of compact loaders. The enormous durability and robustness have been tested at the in-house test bench both alone and in connection with the relating compact loader transmissions. Besides this the axles are characterised by:• Direct mounting of the HC 85 to rear axle MT-L 3045/55• Above centre pivot mount of rear axle• Front with parking brake (disc brake) on the drive• Integrated wet multi-disk brakes• Different differential optionsBesides the hydrostatic drive solution, ZF offers a hydrodynamic axle configuration. The power shift transmission from the range 4WG 98 with torque converter in this case is arranged as a separate unit between these two axles. For this driveline a central oscillation of the rear axle is available.